EN BG
0884 159 206
A custom kitchen with worktop and splashback in one matching stone decor, cream handleless fronts and a breakfast-bar island

welcome

МЕБЕЛ СТИЛ

Furniture made to order for your home — measured, built and fitted by us in Burgas.

About us

Furniture that turns a room into a home

МЕБЕЛ СТИЛ is a custom furniture workshop in Burgas. We make kitchens, bedrooms, children’s rooms, bathrooms and whole-home interiors — each one measured to the room and to the people living in it.

All of it passes through our own hands: measuring on site, the design, the build in our workshop, the fitting. So when something needs adjusting a year later, the person who comes is the person who assembled it.

made with care, in Burgas

KitchensBedroomsChildren’s roomsBathroomsWhole-home interiorsOffice furniture
A whole apartment furnished to order
A custom bedroom with fitted wardrobe A custom kitchen with a wooden worktop

Materials

What a kitchen is actually made of

A kitchen is not one material but four layers, each chosen separately. Here is what they are, what each one does, and why choosing one does not decide the next. The boards are Kronospan, the hardware is Blum.

01

Thickness is the first decision

The worktop takes the water, the knife and the hot pan. The choice here is essentially one, and you see it the moment you walk into the room: 38 millimetres or 12. Everything else — decor, texture, colour — comes after.

K003 Golden Craft Oak — Kronospan 38 mm

The standard worktop

38 mm worktop

A load-bearing chipboard core wrapped in HPL — high-pressure laminate that takes scratching, heat and staining. The front edge is rolled into a U profile, so there is no seam for water to get into. This is the worktop that goes into almost every kitchen.

  • Core: chipboard
  • Surface: HPL
  • Rolled U profile front edge
  • Double U-U profile at 900 mm width
Format
4100 × 600 · 4100 × 900 mm
Decor shown
K003 Golden Craft Oak 60+ decors
K551 Calacatta Olympus — Kronospan 12 mm

The thin worktop

Slim Line 12 mm

A compact board — no chipboard core, the material is solid all the way through. That is why the edge needs no banding and shows no seam. The decor runs on both faces, so the same board works standing up: as a breakfast bar, an open shelf, or the splashback behind the sink.

  • Compact board, monochrome core
  • Double-sided decor
  • Needs no edgebanding
  • Water resistant and impact resistant
Format
4100 × 650 mm
Decor shown
K551 Calacatta Olympus 16+ decors
Thickness, drawn to scale
38 mm
12 mm

Not every decor exists in every material

This is what surprises people most often. Woodgrain and stone decors exist as board and as worktops, but not as a matt or gloss MDF front — there the choice is solid colours only. So the decor and the material get chosen together, not one after the other.

If you want that exact oak, but in a soft matt finish — that is not a combination that exists. Better to know now than at the quote.

Decor MFC MDF front Worktop
Woodgrain decors oak, walnut, ash yes no yes
Stone and concrete marble, travertine, concrete yes no yes
Solid colours matt, gloss, anti-fingerprint yes yes yes

02

The face of the kitchen

Fronts and worktops are different products and are almost never the same material. The choice here is between three things — and it decides how the kitchen looks and how much it smudges.

MFC front

MFC front

Substrate Melamine faced chipboard

A flat panel, edgebanded to match. This is where the entire woodgrain and stone range lives — if you want visible oak, walnut or marble on the fronts, this is the material.

Strength the widest decor choice

Matt or gloss MDF

Matt or gloss MDF

Substrate 17 mm MDF with acrylic or PET foil

An MDF core faced with acrylic or foil. The ultra matt ones are anti-fingerprint and soft to the touch. They come in solid colours only — there is no woodgrain here.

Strength deep colour, soft matt

Routed MDF

Routed MDF

Substrate Primed MDF, ready to paint

MDF can be routed and chipboard cannot. That is why every frame, profile and curve is MDF. It is primed and painted in whatever colour you choose — no decor card to pick from.

Strength profiles and any colour

03

The part nobody sees

The carcass is MFC — melamine faced chipboard, edgebanded on every side including the back and the underside, where corners usually get cut. Cabinet backs are HDF; drawer bottoms are MFC, so they carry weight without bowing. None of this is visible, and all of it is why the doors still line up in ten years.

  • 18 mm MFC for the load-bearing cabinet sides
  • Edgebanded on every side, not just the front
  • HDF cabinet backs
  • MFC drawer bottoms

04

The part that moves

Everything that opens and closes is Blum. It is also the part where the difference between a cheap kitchen and a good one shows — not in year one, but in year ten. Hinges, drawers and lift systems carry the manufacturer’s lifetime guarantee.

LEGRABOX

Drawers

A double-walled box with a slim steel side and a straight line. It runs without wobble even loaded and fully extended.

MOVENTO

Runners

Concealed runners for drawers made of wood or MDF — for when the drawer box itself should match the kitchen rather than be steel.

BLUMOTION

Soft close

The damper is built into the mechanism itself, not bolted on afterwards. Drawers and doors stop softly no matter how hard they are pushed.

CLIP top BLUMOTION

Hinges

They clip on and off without tools, and adjust in three directions. That is why the doors can be realigned years later.

AVENTOS

Lift systems

For wall units: the front lifts up and stays there, instead of swinging sideways into your head.

TIP-ON BLUMOTION

Handleless

Press the front and it opens — fully mechanical, no power and no batteries. The way to build a kitchen without a single handle.

A custom kitchen by МЕБЕЛ СТИЛ

A room becomes a home when everything in it is in its place

How we work

From the first measurement to the last handle

  1. 01

    A visit

    We come to you, take the measurements and listen to how you use the room every day.

  2. 02

    The design

    We show you how it will look and choose materials, decors and hardware together.

  3. 03

    The making

    Your furniture is built in our workshop in Burgas, piece by piece.

  4. 04

    Fitting

    We assemble on site, clean up after ourselves and stay available afterwards.

Reviews

What our clients say

The reviews below were posted by clients on Google. Click through to see them on our profile.

I highly recommend Mebel Stil. True professionals, from the design through to the making and the fitting. They furnished our whole apartment.

Trifon B.

Professionals! They make quality furniture to each client’s own order. Order from Mebel Stil — you will be delighted!

Ivan V.

Exceptional professionals! Highly recommended, their work is flawless.

Aylin S.

See all reviews on Google

Contact

Tell us about your room

Call, write, or drop by the workshop. We reply within the working day.

Address

59 Aleksandar Veliki St.
Burgas, Bulgaria

Opening hours

Monday – Friday: 9:30 – 18:00Saturday: 9:30 – 13:30Sunday: Closed

59 Aleksandar Veliki St.
Burgas, Bulgaria

The map loads from Google and sets cookies.